Home / Standards / ISO 9001

ISO 9001:2026QMS

ISO 9001 certification: quality management system

ISO 9001 certification is an independent assessment of whether your quality management system meets the requirements of the standard. This page describes the standard, the audit and the certification process at Dansk Audit Institut.

Standard

ISO 9001:2026

6th edition, September 2026

Covers

Quality management

Clauses 4 to 10 of the standard

Certificate

Valid for three years

With annual surveillance audit

Accreditation

Non-accredited

Outside the DANAK accreditation

What is ISO 9001?

ISO 9001 is the international standard for quality management systems. The standard sets requirements for a quality management system that the organisation can use to demonstrate its ability to consistently provide products and services that meet customer requirements and applicable statutory and regulatory requirements. An ISO 9001 certification is an independent assessment of whether the organisation's quality management system meets these requirements.

The current edition is ISO 9001:2026, 6th edition, published on 16 September 2026. It replaces ISO 9001:2015 with Amendment Amd 1:2024 on climate considerations. The Danish designation is DS/EN ISO 9001:2026, which is published by Dansk Standard.

The standard follows the harmonised structure with clauses 4 to 10 and is based on three overarching approaches:

  • Process approach: the organisation's activities are managed as interrelated processes.
  • Risk-based thinking: risks and opportunities are taken into account in planning and control.
  • The PDCA cycle: plan, do, check and act, as the basis for continual improvement.

The operational requirements in clause 8 include requirements for products and services, design and development, control of externally provided processes, products and services, production and service provision, and release. The requirements are generic so that they can be applied to organisations of very different kinds.

Who is ISO 9001 relevant for?

ISO 9001 can be used by organisations in all sectors and of all sizes. The standard sets requirements for the management system itself and not for a particular type of product or service. It is used in areas such as manufacturing, construction and civil engineering, trade, services and consultancy, IT and transport.

Relevance is often linked to the organisation's position in a supply chain. Suppliers to public authorities and to larger companies may face requirements for documentation of quality management, either in tender documents or in supplier requirements. In these cases, it is important to know the recipient's formal requirements for the certificate, including whether accredited certification is required (see the section on accreditation status in the frequently asked questions).

Other organisations choose ISO 9001 as a framework for consistent management of processes, responsibilities and improvement work, without any customer requiring it. The standard is voluntary, and the choice to become certified is a decision for each organisation.

What does a certification audit against ISO 9001 assess?

An ISO 9001 audit assesses whether the quality management system is established, implemented and operates effectively in relation to the requirements of the standard and the organisation's own scope. The audit assesses, among other things:

  • the scope of the quality management system, the context of the organisation and the requirements of interested parties
  • leadership commitment, the quality policy and the quality objectives
  • the handling of risks and opportunities and the planning of changes
  • competence, resources and documented information
  • the operational processes from customer requirements through design and development to delivery
  • the control of external providers and externally provided processes, products and services
  • monitoring and measurement, including measurement of customer satisfaction
  • internal audit and management review
  • nonconformities, corrective actions and continual improvement

The audit is based on documentation, interviews and observation of how the management system works in practice. Each finding is linked to a requirement in the standard. Failure to fulfil a requirement is classified as a major or minor nonconformity, while other matters may be recorded as observations. Nonconformities must have been addressed in accordance with the rules of the certification process, before the certification decision is made.

The auditors assess conformity with the standard and do not prescribe how the management system should be designed. The audit is not an assessment of whether legislation has been complied with.

ISO 9001 and legislation

ISO 9001 is a voluntary standard. No general legislation requires an organisation to be certified against the standard. However, the standard requires the organisation to identify and address the statutory and regulatory requirements applicable to its products and services, and this is included in the audit as part of the management system.

An ISO 9001 certification is not proof of compliance with product or sector legislation. The certification concerns the quality management system and not the conformity of the individual product with legal requirements. Responsibility for complying with legislation lies with the organisation and cannot be transferred to a certificate.

Under § 157(1) of the Danish Public Procurement Act, a contracting authority may require certificates issued by independent bodies for quality assurance standards. If the contracting authority does so, it must refer to quality assurance systems based on the relevant European standards series and certified by approved bodies (in Article 62(1) of Public Procurement Directive 2014/24/EU: accredited bodies). Other appropriate evidence must only be accepted in the cases referred to in § 157(3). Dansk Audit Institut's ISO 9001 certificates are non-accredited, so it is relevant to clarify in the tender conditions whether they can be used.

Current edition and transition

As of November 2026, ISO 9001:2026 is the current edition. For accredited certification, the Global Accreditation Cooperation Incorporated (Global ACI) has set a transition period of three years, so certificates to the 2015 edition must be transitioned by 30 September 2029 at the latest. Dansk Audit Institut certifies only against the current edition, ISO 9001:2026. An organisation that transfers to Dansk Audit Institut with a certificate to ISO 9001:2015 is therefore audited against ISO 9001:2026, and the process is determined in the specific case.

According to Dansk Standard's announcement of the publication, the changes consist mainly of clarifications. They include, among other things, top management's responsibility for quality culture and ethical behaviour, a clearer distinction between risks and opportunities, clearer requirements for planning of changes, incorporation of the 2024 climate amendment and an expanded informative Annex A.

How certification works

Dansk Audit Institut carries out the certification in accordance with its certification procedures, which are designed in accordance with ISO/IEC 17021-1. Certification against ISO 9001 is not covered by DANAK’s assessment. The process consists of five steps:

The process is described step by step on the page about the certification process.

Application and agreement

You provide information on matters such as scope, locations, number of employees and processes. Dansk Audit Institut reviews the application, determines the audit time and sends a quotation and agreement.

Stage 1

Review of the management system's documentation and scope, and of whether the organisation is ready for stage 2. Stage 1 is the first part of the certification audit (at Dansk Audit Institut also called pre-audit) and is not a preliminary assessment or gap analysis. The conclusions are communicated to you, including issues that could be classified as nonconformities in stage 2. Stage 1 assesses, among other things, whether internal audits and management review have been planned and conducted, and whether the management system has been implemented to an extent that shows the organisation is ready for stage 2.

Stage 2

Assessment at your premises of whether the management system has been implemented and is operating effectively.

Certification decision

The decision is made by persons who did not conduct the audit themselves. The certificate is valid for three years.

Surveillance and recertification

The first surveillance audit is conducted no later than 12 months after the certification decision and thereafter at least once in each calendar year of the certification period. The recertification audit is conducted in year 3 before the certificate expires.

Combination with other standards

ISO 9001 is based on the harmonised structure for management system standards. Certification against several standards can therefore be planned as one combined process, in which common elements such as internal audit and management review are assessed together. This applies, for example, to ISO 14001 and ISO 22301. The requirements of each standard continue to be assessed separately.

Separate certificates are issued for each standard. Audit and certification to ISO/IEC 27001 are carried out and reported separately under the DANAK accreditation, and only the certificate to ISO/IEC 27001 is an accredited certificate. Dansk Audit Institut also certifies to ISO/IEC 27701, ISO/IEC 42001 and IEC 62443.

Frequently asked questions

Are Dansk Audit Institut's ISO 9001 certificates accredited?

No. Certification against ISO 9001 is carried out outside Dansk Audit Institut's DANAK accreditation, which as of November 2026 covers certification against ISO/IEC 27001. The certificates are therefore non-accredited. Some customers, tenders and schemes require accredited certification, so it is relevant to know the requirements the certificate must meet for the recipient.

What is new in ISO 9001:2026?

According to Dansk Standard's announcement, the changes consist mainly of clarifications. They include, among other things, top management's responsibility for quality culture and ethical behaviour, a clearer distinction between risks and opportunities, clearer requirements for planning of changes and an expanded informative Annex A.

By when must ISO 9001:2015 certificates have been transitioned?

For accredited certification, Global ACI has set a transition period of three years, so certificates to the 2015 edition must be transitioned by 30 September 2029 at the latest. Dansk Audit Institut certifies only against ISO 9001:2026.

Is ISO 9001 a legal requirement?

No. ISO 9001 is a voluntary standard. Nor is a certification proof of compliance with product or sector legislation. The standard requires the organisation to identify and address the statutory and regulatory requirements applicable to its products and services.

Can ISO 9001 be required in a tender?

Yes. A contracting authority may require a certificate for a quality assurance standard, cf. § 157 of the Danish Public Procurement Act. In that case, reference must be made to certification by approved bodies, which the Public Procurement Directive refers to as accredited bodies. Other evidence is only accepted in special cases. The tender conditions determine whether a non-accredited certificate is sufficient.

How long is an ISO 9001 certificate valid?

The certificate is valid for three years. During this period, a surveillance audit is carried out at least once in each calendar year in years 1 and 2, and in year 3 a recertification audit is carried out before expiry. The certificate may be affected by the outcome of these audits.

How much does ISO 9001 certification cost?

The price depends on the audit time, which in turn depends on the organisation's size, complexity, number of locations and risks. Audit time is determined in accordance with Dansk Audit Institut's documented procedures. To determine the audit time and send a quotation, Dansk Audit Institut needs to know the scope, the number of employees, processes and locations, any outsourced processes and existing certifications.

How long does ISO 9001 certification take?

The calendar time from agreement to certificate depends mainly on three factors: when stage 1 can be conducted, the interval between stage 1 and stage 2, and how quickly any nonconformities are addressed. The interval between stage 1 and stage 2 is determined based on your need to address the issues identified in stage 1. The certificate is only issued once the nonconformities have been addressed and the certification decision has been made. If the implementation of corrections and corrective actions for a major nonconformity cannot be verified within six months of the last day of stage 2, a new stage 2 is conducted. The number of audit days is stated in the quotation.

Can ISO 9001 be audited together with other standards?

Yes. Certification to several standards can be planned as one combined process. Each standard is assessed against its own requirements, and separate certificates are issued.

Samarbejde mellem kollegaer på kontoret

Would you like to be certified to ISO 9001?

Send an enquiry using the form on this page or via the contact page. Dansk Audit Institut determines the audit time on the basis of information about your organisation, scope and locations and then sends a quotation. The enquiry is without obligation, and the information is treated confidentially.

Which standards does your enquiry concern?